SWISS WIRE EDM provides world class electrical discharge machining specializing in complex prototype and production work for the aerospace, medical, & commercial industries, with a particular capability for machining large components.
Let us help you envision the future.
From the smallest medical device to a rover on Mars.
What are you dreaming about?
Areas of Work
We meet the most demanding EDM specifications for a wide variety of materials such as aluminum, steel, copper, tungsten-carbide, graphite as well as exotic metals such as titanium and molybdenum. Many of the latest exotic alloys used in the aerospace industry such as titanium and molybdenum are much more easily machined with EDM than with conventional machining techniques.
By contrast, they have a number of production contracts involving parts that are small enough, almost to be considered microscopic, and corner radii less than 0.001.
Our climate controlled facility offers the latest in 5-axis EDM Machines, and can process components weighing from a few grams to over 4000 lbs and measuring up to 60" diameter. We cut parts up to 48" thick, angles to 30 degrees and corner radii less than 0.002". Our 19 EDM machines operate 24/7 as necessary to meet delivery requirements.
SWISS WIRE E.D.M.
Specializing in:
Wire EDM Services Plunge (sinker) EDM Services Fine Hole EDM Services
Certifications :
ISO 9001:2015 AS9100D NADCAP
Our Capabilities
We meet the most demanding EDM specifications for a wide variety of materials such as aluminum, steel, copper, tungsten-carbide, graphite as well as exotic metals such as titanium and molybdenum.
Our climate controlled facility offers the latest in 5-axis EDM Machines, and can process components weighing from a few grams to over 4000 lbs and measuring up to 60" diameter. We cut parts up to 48" thick, angles to 30 degrees and corner radii less than 0.002". Our 19 EDM machines operate 24/7 as necessary to meet delivery requirements.
Industries Served:
Aerospace/Defense
Medical Electronics
Industrial Medical Energy Robotics Automotive 3D Manufacturing
We are proud to provide technical solutions that are responsive to our clients' needs, innovating, cost effective, and of the highest quality.
ROLLS ROYCE • BOEING • LOCKHEED MARTIN • NASA •
GE AIRCRAFT ENGINES • NORTHROP GRUMMAN •
LITTON GUIDANCE & CONTROL SYSTEMS •
EATON • HUGHES • 3M
• PARKER-HANNIFIN • HEWLETT PACKARD •
JOHNSON & JOHNSON • TESLA
Since our founding in 1977, process, quality control, and innovation
have always been paramount in our business operations.
Malcolm Schneer
CEO, Swiss Wire E.D.M.
I had a look at the parts yesterday I must say they look great. The fit up is just what we are looking for.The overall look of the assemblies is a thing of beauty. You and your staff did great the job, This was more than just manufacture from the drawing, the fit up and assembly makes it work.
Manufacturing Engineering
Lockheed Martin Space Systems, Sunnyvale
I am impressed that Swiss Wire EDM was able to produce this part considering all of the tight tolerances that are required. I particularly appreciate that Swiss was able to deliver these parts as completed units, having performed conventional machining, EDM, and finishing, thus relieving us of coordinating this work internally.
RF Technology & Microsystems
Boeing Research & Technology
SWISS WIRE E.D.M.
3505 Cadillac Ave., Unit J-1, Costa Mesa, CA 92626
877-467-9336 - fax 714-557-2959
Site Map
Receive occasional reports about projects and company announcements.
All Rights Reserved © Copyright 2023 | SWISS WIRE E.D.M.
Website design by TC Two Creative Studios
